CuO GANS

Uit Keshe Foundation Wiki nl
Dit is de goedgekeurde versie van deze pagina. Er is geen nieuwere versie.
Ga naar: navigatie, zoeken
CuO-GANS before it has settled. CuO-GANS has just to settle.

Production

For the production of CuO GANS you need an uncoated copper coil, or copper plate, and a nano-coated copper coil or nano-coated copper plate. Connect the uncoated copper to the nano-coated copper with a copper wire and place them in a sea salt water solution. To speed up the GANS production process, you can use a small amount of DC current and a small aerator (fish tank pump). A DC-device, which provides approximately 15 mA DC current between the two plates, or coils, can be used instead of the copper wire between the plates. The negative pole of the device is connected to the nano-coated copper and the positive pole of the device is connected to the uncoated copper. If you use a current you must apply an aerator to provide additional oxygen to the salt water solution. After a few hours a turquoise layer builds on the bottom of the container and settles there. This is CuO GANS. To get a better result, you can mount a coil of a PC fan between the two metals instead of a wire or a current source. (CAUTION: never touch GANS with any part of the body).

Required Materials:

  • Plastic Container
  • Uncoated copper plate (or coil)
  • Nano-coated copper plate (or coil)
  • 100 grams of sea salt
  • 1 litre of distilled water
  • Optional: DC Device and aerator (small fish tank pump)

CuO GANS Uses/Application

Copper represents the physical body (in connection with the field interactions); it affects the muscle tissue and the nervous system. Copper is responsible for good communication through the nerves and copper acts as a disinfectant. The Ghana Keshe Foundation, in cooperation with the National Atomic Research Institute, carried out tests where microbial contaminated drinking water was cleaned with CO2 and CuO GANS water. The contaminated water was cleaned of contaminants and transformed into drinkable water. Bacteria, salts and even arsenic and mercury are neutralized through CuO GANS water application to the point where these harmful elements were no longer detectable in the test samples of contaminated water. CuO GANS water can be used in many areas as a natural disinfected. (e.g. rooms where food is produced, hospitals, kitchens, toilets, bathrooms and so on). CuO is also used for energy production.