CH3 GANS: verschil tussen versies

Uit Keshe Foundation Wiki nl
Ga naar: navigatie, zoeken
 
(3 tussenliggende versies door 2 gebruikers niet weergegeven)
Regel 1: Regel 1:
[[File:CH3 FeO Caputure Kit.jpg|thumb|Schematic setting of CH3-production without current;
+
[[File:CH3 FeO Caputure Kit.jpg|thumb|Schematische opstelling van CH3-productie]]
instead of the shortcut you can also use DC of a battery]]
+
Productie
==== Production ====
 
CH3 GANS is produced by using an zinccoated iron plate (or coil) in combination with a nano-coated copper coil or plate. The two metals are connected together with a copper wire. Unlike the production of CO2 GANS, you can use a very small amount of DC current and a fish tank pump (aerator) to speed the production process, but the pump is not mandatory.  At first, there will be a reaction between zinc and nanocoated copper, after a while, the reaction between iron and nanocoated copper starts. You can use a common, adjustable DC device, which produces current of approximately 15 mA between the two metal plates instead of the connection of a copper wire. If you do, the negative pole of the device is attached to the nano-coated copper coil or plate and the positive pole of the device is connected to the iron. You could also use a 1.5 V battery as power source.  If you use any kind of current you should aerate the salt solution with a small fish tank pump.  It will only take a few hours to produce a reddish brown layer of CH3 GANS at the bottom of the container.  To get a better result, you can mount a coil of a PC fan between the two plates instead of a wire or a current source. ('''CAUTION''': never touch GANS with any part of the body).
 
  
Required Materials:
+
CH3 GANS wordt geproduceerd door een gegalvaniseerde(laagje zink op ijzer) ijzeren spoel of plaat. ( ik gebruikt en raad aan kippengaas te gebruiken,dit is makkelijk te verkrijgen) in combinatie met een nano-gecoate koperen spoel of plaat. De twee metalen delen zijn verbonden met twee koperdraden( niet nano-gecoate ) deze twee draden verbind je aan elkaar (zie het plaatje aan de rechter kant ) .
* Plastic Container
+
 
* Zinccoated iron plate or wire (e.g. chicken mesh)
+
In eerste instantie zal er een reactie zijn tussen zink en nano-gecoated koper (na verloop van tijd zie je een luchtige witte GaNS ontstaan( Dit is een Mix van Zink,Co2 GaNS ), nadat het zinklaagje ( het zilveren laagje van de kippengaas ) voor een deel is opgelost,begint de reactie tussen ijzer en nano-gecoated koper.( Nu komt er boven op de wittige GaNS, een oranje gele GaNS te liggen,dit is de CH3 GaNS )
* Nano-coated copper coil or plate
+
 
* 100 grams of sea salt
+
Hoe langer  je dit zijn gang laat gaan, zal meer CH3 neerdalen, en de productie zal na verloop van tijd stoppen, op het water zal er een laagje aminozuur ontstaan zijn die gebonden is aan ijzer !
* 1 litre of distilled water
+
 
* Optional: DC-Device and fish tank aerator
+
Wanneer de productie is gestopt, of omdat u vindt dat het zo goed genoeg is, roert u de de GaNS met aminozuur door elkaar, en verwijderd u de metalen delen, nu laat u dit zo lang mogelijk staan tot alles bezonken is, als dit het geval is gooit u het zoute water er zo veel mogelijk uit zonder de GaNS te laten ontsnappen, en kunt u beginnen met het wassen van de GaNS met gedestilleerd water( doe dit heel goed, liever te veel dan te weinig 4 keer zeker !)
 +
 
 +
Het zal u duidelijk zijn dat u op deze manier geen puur CH3 heeft maar een Mix met een beetje Zink en Co2 en flink wat CH3, wat meer dan prima is voor de toepassingen voor de meeste mensen !
 +
 
 +
Voor de productie is tijd nodig, probeer dit niet te versnellen (met stroom), de kwaliteit zal er minder door worden, u bent geen bedrijf die grote hoeveel heden maakt, u doet dit voor u zelf en u geliefden die verdienen de tijd en de aandacht die u er aan besteed, vergeet niet u intentie waarom u het maakt speelt een héle grote rol in de kwaliteit van de GaNS en dus hoe hij werkt !
 +
 
 +
Veel plezier :)
 +
 
 +
(LET OP: raak GANS nooit aan met een deel van het lichaam)   
 +
 
 +
Benodigde materialen:
 +
* Kunststof container
 +
* Gegalvaniseerde ijzeren plaat of draad (bijvoorbeeld kippengaas)
 +
* Nano-gecoate koperen spoel of plaat
 +
* 100 gram zeezout
 +
* 1 liter gedestilleerd water
  
 
<gallery>
 
<gallery>
CH3 100.jpg|Iron plate, coated copper coil, oxygen pumped in and 0,15 Amp current (battery)
+
Bestand:CH3 102.jpg|Gewassen CH3 GaNS
CH3 102.jpg|Washed CH3 GANS
 
 
</gallery>
 
</gallery>
  
Regel 21: Regel 33:
  
 
Every time you want to apply CH3 GANS liquid as food you must add amino acids. The amino acids tell the body that the energy is provided for the body. The GANS and the amino acids are created within the same container and therefore have an inner connection regarding their inner structure. This inner connection is necessary for the fields of the GANS and its information, which are available within the GANS water and the liquid plasma, to be transferred to the molecules of the cells of a living body. Procedures are topics of present and future research.  CH3 GANS is also necessary for technical energy production.
 
Every time you want to apply CH3 GANS liquid as food you must add amino acids. The amino acids tell the body that the energy is provided for the body. The GANS and the amino acids are created within the same container and therefore have an inner connection regarding their inner structure. This inner connection is necessary for the fields of the GANS and its information, which are available within the GANS water and the liquid plasma, to be transferred to the molecules of the cells of a living body. Procedures are topics of present and future research.  CH3 GANS is also necessary for technical energy production.
 
This is a test of uploading: [[File:Image20170704020223.jpg]]
 
  
 
[[Category: Nano-Coating and the Production of GANS]]
 
[[Category: Nano-Coating and the Production of GANS]]

Huidige versie van 2 apr 2018 om 21:08

Schematische opstelling van CH3-productie

Productie

CH3 GANS wordt geproduceerd door een gegalvaniseerde(laagje zink op ijzer) ijzeren spoel of plaat. ( ik gebruikt en raad aan kippengaas te gebruiken,dit is makkelijk te verkrijgen) in combinatie met een nano-gecoate koperen spoel of plaat. De twee metalen delen zijn verbonden met twee koperdraden( niet nano-gecoate ) deze twee draden verbind je aan elkaar (zie het plaatje aan de rechter kant ) .

In eerste instantie zal er een reactie zijn tussen zink en nano-gecoated koper (na verloop van tijd zie je een luchtige witte GaNS ontstaan( Dit is een Mix van Zink,Co2 GaNS ), nadat het zinklaagje ( het zilveren laagje van de kippengaas ) voor een deel is opgelost,begint de reactie tussen ijzer en nano-gecoated koper.( Nu komt er boven op de wittige GaNS, een oranje gele GaNS te liggen,dit is de CH3 GaNS )

Hoe langer je dit zijn gang laat gaan, zal meer CH3 neerdalen, en de productie zal na verloop van tijd stoppen, op het water zal er een laagje aminozuur ontstaan zijn die gebonden is aan ijzer !

Wanneer de productie is gestopt, of omdat u vindt dat het zo goed genoeg is, roert u de de GaNS met aminozuur door elkaar, en verwijderd u de metalen delen, nu laat u dit zo lang mogelijk staan tot alles bezonken is, als dit het geval is gooit u het zoute water er zo veel mogelijk uit zonder de GaNS te laten ontsnappen, en kunt u beginnen met het wassen van de GaNS met gedestilleerd water( doe dit heel goed, liever te veel dan te weinig 4 keer zeker !)

Het zal u duidelijk zijn dat u op deze manier geen puur CH3 heeft maar een Mix met een beetje Zink en Co2 en flink wat CH3, wat meer dan prima is voor de toepassingen voor de meeste mensen !

Voor de productie is tijd nodig, probeer dit niet te versnellen (met stroom), de kwaliteit zal er minder door worden, u bent geen bedrijf die grote hoeveel heden maakt, u doet dit voor u zelf en u geliefden die verdienen de tijd en de aandacht die u er aan besteed, vergeet niet u intentie waarom u het maakt speelt een héle grote rol in de kwaliteit van de GaNS en dus hoe hij werkt !

Veel plezier :)

(LET OP: raak GANS nooit aan met een deel van het lichaam)

Benodigde materialen:

  • Kunststof container
  • Gegalvaniseerde ijzeren plaat of draad (bijvoorbeeld kippengaas)
  • Nano-gecoate koperen spoel of plaat
  • 100 gram zeezout
  • 1 liter gedestilleerd water

CH3 GANS Uses/Application

CH3 GANS water will strongly energize the body and is nutritious. For instance, 8 drops of CH3 GANS water combined with 1 drop of ZnO GANS water and 1 drop of CO2 GANS water will yield the following results: The plasmatic fields of CH3 GANS water gives energy to the body while the plasmatic fields of the ZnO GANS water support the nervous system. The plasmatic fields of the CO2 GANS water acts on muscles and the nervous system. The carbon within CH3 and CO2 GANS waters release energy while the hydrogen of the CH3 GANS water and the oxygen of CO2 GANS water combine to provide moisture, which is needed in the body. The energy of the hydrogen of the CH3 GANS water becomes food for the body. The ZnO GANS water supports nerve connections that are needed to assimilate energy into the body. To assure the application is effective, always add one drop of amino acid of each type of GANS to your drop mixture. The amino acid builds up on the top of the salt water solution during the production of each of the GANS' (see Amino Acids).

Every time you want to apply CH3 GANS liquid as food you must add amino acids. The amino acids tell the body that the energy is provided for the body. The GANS and the amino acids are created within the same container and therefore have an inner connection regarding their inner structure. This inner connection is necessary for the fields of the GANS and its information, which are available within the GANS water and the liquid plasma, to be transferred to the molecules of the cells of a living body. Procedures are topics of present and future research. CH3 GANS is also necessary for technical energy production.